LAGUNA Revo 24|36 Lathe 220 Volt

Wall Thickness of legs on the Revo 24|36 is 80% heavier compared to the Revo 18|36.

Redesigned banjo features a more compact design, 45 cutout & wider base.

Having a second control panel that mounts in two positions (high or low) sets the Revo 24|36 apart from any other lathe in the world, not only can you turn off the machine from this control panel, but it allows the operator to change speed as well. A switch on the back of the headstock designates whether you control the Revo from the headstock control panel or the corresponding control panel. The E Stop works on both at any given time.

And YES, this amazing control panel comes standard with the Revo 24|36.

Owner’s Manual

FEATURES:

• Motor: Induction, 1725 RPM, 3HP, 220V, 60Hz.
• Phase: 1-Phase Input, 3-Phase Output.
• VFD: Delta S1 Variable Frequency Drive.

Recommended Breaker Size:15 Amp

Remote Control Box With Speed Settings

Two Ergonomic Control Panel Positions:High/Low

Drive Belt:Poly-Groove With EZ Access

Tailstock Quill:4-, Engraved, Self-Ejecting

Floor Top Spindle Center:44-

Front Bearing:TPI Taiwan 6307LLU

Rear Bearing:TPI Taiwan 6205LLU

Spindle Index #:14/36/48 with Lock

Distance Between Centers:36

Headstock Through-Bore:

Tailstock Storage Of Centers

Toolrest Post Size:1

Spindle Size:1- x 8 TPI RH

Floor To Bed:32- with Pads

Spring Loaded Spindle Lock

Maximum Outboard Turning Diameter:38 (w/ Optional 20 Extension Installed)

Swing Over Banjo:19-

Accepts Vacuum Chuck:Yes

Face Plate:3 Diameter

Tool Rest:12

Steel Bed:ASTM A36

Bed Gap:50mm

Headstock Spindle:MT2 Taper Hardened To 40 HRC

Live Center Threads:3/4 10 UNC

Tailstock Quill:#2 MT

Swing Over Bed:24

RPM High:135-3500

RPM Low:50-1300

Plug:6-15P

Dimensions (W x D x H):60 x 26 x 52-

Shipping Weight:610 lbs

Shipping Dimensions (L x W x H):36 x 40 x 50